Malden welded wire / system overview
Two welded-wire systems.
One clear perimeter language.
Malden Fortress and Malden Vanguard are two distinct welded-wire panel paths, presented with shared mounting options, bracket conditions and technical resources.
This page is a temporary public review preview. Verify final product, commercial and installation details with Direct Fencing Supply.
01 / Select a panel system
Start with the panel expression.
Fortress uses a tight anti-climb welded-wire pattern. Vanguard uses varied spacing sections for an architectural perimeter rhythm.
01 / Malden Fortress
Tight mesh.
Clear perimeter control.
90.5 in W × 94 in H welded-wire panel with 4 mm wire and a 12.7 mm × 76.2 mm mesh pattern.
02 / Malden Vanguard
Measured rhythm for architectural boundaries.
90.5 in W × 73 3/16 in H welded-wire panel with distinctive varied spacing sections.
02 / Shared system
Plan the full system.
Each panel path should be considered with its post/mounting approach and connection condition.
Post options
Three mounting paths.
Standard 2.5 in square post, 2 3/8 in round pipe with round brackets, or pound pipe in ground with a 2.5 in square sleeve post.
Bracket conditions
Three connection types.
Corner, End/Universal and Line brackets are represented for project planning. Final hardware details remain pending.
Resources
Technical drawings first.
Supplied panel drawings are available now. Installation, CAD/BIM, finish and warranty documentation remain in preparation.
Available through Direct Fencing Supply
Prepare the supply conversation.
For availability, samples, project requirements and final commercial details, continue through Direct Fencing Supply.